Description
- Machine vision
- Process control
- Automation
- Metrology
- Pyrometric functions
- Temp. measurement
One radiometric thermal camera for all of your needs
Temperature measurement is the second most common measurement in industry today. SMARTIS radiometric thermal camera enables contact-free temperature measurement in hundreds of different applications around the world.
Laser Welding
Soldering
Laminating
Windscreen heating
YOUR APPLICATION
Features and Configurations
- An in-built webserver for the camera setting and process visualisation
- A TCP/IP interface for communication with a superior system
- Digital inputs/outputs enabling triggering and alarm outputs
- Temperature measurement up to 1500 °C (2732 °F)
The Workswell SMARTIS radiometric thermal camera can be operated and configured independently without the need for a direct connection to a PC or a superior unit. The thermal camera is offered in resolutions of 336 x 256 px and 640 x 512 px. A LWIR (Long Wave InfraRed) microbolometer with the spectral range of 7.5 – 13.5 μm and different lenses.
Measurement & Connectivity
The Workswell SMARTIS radiometric thermal camera is designed for process automation and machine vision but can also be used for continuous measurements of temperature in metrological and research applications.
The SMARTIS thermal camera has been designed for use in process automation so that it can autonomously control a separate smaller process however, could also become a part of the more extensive control system. Therefore, it has been equipped with a TCP/IP interface (Ethernet 100Mb/sec, RJ-45) which is complemented with digital inputs and analogue outputs (current loop 0-24 mA/12 V).
The measurement scope of the thermal camera ranges from -25 °C to 550 °C (-13 °F to 1022 °F), optionally up to 1500 °C (2732 °F). Metrologic accuracy (±2% or ±2°C (±3.6°F) ) and sensitivity (up to 50 mK, i.e. 0.05 °C (0.09 °F) ) have stood as priorities in the thermal camera’s development.
BUILT-IN WEBSERVER & SDK
The Workswell SMARTIS radiometric thermal camera contains an built-in webserver allowing for easy setup of the thermal camera as well as measurement functions, inputs and outputs and image streaming options all to be controlled remotely.
An SDK for integrating the thermal imager into your devices is available. SMARTIS Ethernet SDK is a set of commands, intended to control the SMARTIS camera over the Ethernet con-nection without the need of a web browser. The SMARTIS runs a TCP/IP server for the control. The opened server is similar to telnet protocol and can beused with telnet terminal software.
SMARTIS Interfaces
- 4x digital input/output for trigger
- Power supply
- Ethernet TCP/IP with a RJ-45 connector for communication with PLC, but also with the in-built webserver
- 4x current output (0-24 mA/12 V current loop)
- 7x digital output (with an open collector)
SMARTIS Videos
Technical information & documents
| SMARTIS 336 | SMARTIS 640 | |
|---|---|---|
| Resolution | 336 x 256 pixels | 640 x 512 pixels |
| Image Frequency | 9Hz, 30Hz or 60Hz | 9Hz, 30Hz |
| Temperature ranges | -25°C to +150°C (-13°F to +302°F), -40°C to +550°C (-40°F to +1 022°F), optional with external filter +400°C to +1 500°C (+752°F to +2 732°F) and 50°C to 1000°C (122°F to 1832°F) | |
| Temperature sensitivity | 0.05°C (50mK, 0.09°F) | |
| Accuracy | ±2% or ±2°C (±3.6°F) | |
| Spectral Range | 7.5 – 13.5 μm | |
| Calibration | Yes, the system includes the calibration certificate | |
| Detector Type | Uncooled VOx microbolometer | |
| Optics (FOV) | 17°, 25°, 35°, 45° | 32°, 45°, 69° |
| Focus | Continuous Manual (fixed focusable, min focus distance depends on lens) | |
| Networking | Ethernet 100Mb/sec, RJ-45, Metal cable gland protection | |
| Analog output | 4-channel isolated Current loop (0-24mA) / Voltage (±12VDC, M12 circular thread) | |
| Camera configuration | Built-in WEBserver for easy and fast sensor configuration, Google Chrome or Firefox browser compatible, no external software required | |
| Vizualization | Realtime video streaming, Pallete settings, Overlay elements, Digital zooming, Numeric and statistical indicators, Input and Output overview panel | |
| ROI | User definable measurement area (Point, Line, Polyline, Rect, Polygon, Circle) Multiple product selection for ROI presets (Manual or via Ethernet) | |
| Dimensions and weight | 185 x 100 x 105 mm, 1.3 kg, Durable aluminum two – milled body | |
Datasheet
EN, 1.5 MB, v210513
