Linkedin Google Plus Listing

Welcome to our Website

Workswell SMARTIS Radiometric thermal camera

It is an all-in-one solution featuring a thermal camera, control unit, I/O card as well as a TCP/IP interface integrated within a single casing including an in-built webserver allowing for communication with a superior system including any PLC.


Share on facebook
Share on whatsapp
Share on twitter
Share on email


One thermal camera for all of your needs

Temperature measurement is the second most common measurement in industry today. SMARTIS thermal cameras are already enabling contact-free temperature measurement in hundreds of different applications around the world.

Workswell SMARTIS Radiometric thermal camera

Laser Welding

Workswell SMARTIS Radiometric thermal camera


Workswell SMARTIS Radiometric thermal camera


Workswell SMARTIS Radiometric thermal camera

Windscreen heating

Workswell SMARTIS Radiometric thermal camera


Features and Configuration possibilities

  • An in-built webserver for the camera setting and process visualisation
  • A TCP/IP interface for communication with a superior system
  • Digital inputs/outputs enabling triggering and alarm outputs
  • Temperature measurement up to 1500 °C (2732 °F)

The Workswell SMARTIS thermal camera can be operated and configured independently without the need for a direct connection to a PC or a superior unit. The thermal camera is offered in resolutions of 336 x 256 px and 640 x 512 px. A LWIR (Long Wave InfraRed) microbolometer with the spectral range of 7.5 – 13.5 μm and different lenses.

Workswell SMARTIS Radiometric thermal camera
Workswell SMARTIS Radiometric thermal camera

Measurement & Connectivity

The Workswell SMARTIS thermal camera is designed for process automation and machine vision but can also be used for continuous measurements of temperature in metrological and research applications.

The SMARTIS thermal camera has been designed for use in process automation so that it can autonomously control a separate smaller process however, could also become a part of the more extensive control system. Therefore, it has been equipped with a TCP/IP interface (Ethernet 100Mb/sec, RJ-45) which is complemented with digital inputs and analogue outputs (current loop 0-24 mA/12 V).

The measurement scope of the thermal camera ranges from -25 °C to 550 °C (-13 °F to 1022 °F), optionally up to 1500 °C (2732 °F). Metrologic accuracy (±2% or ±2°C (±3.6°F) ) and sensitivity (up to 50 mK, i.e. 0.05 °C (0.09 °F) ) have stood as priorities in the thermal camera’s development.


The Workswell SMARTIS thermal camera contains an built-in webserver allowing for easy setup of the thermal camera as well as measurement functions, inputs and outputs and image streaming options all to be controlled remotely.

An SDK for integrating the thermal imager into your devices is available. SMARTIS Ethernet SDK is a set of commands, intended to control the SMARTIS camera over the Ethernet con-nection without the need of a web browser. The SMARTIS runs a TCP/IP server for the control. The opened server is similar to telnet protocol and can beused with telnet terminal software.

Workswell SMARTIS Radiometric thermal camera
Workswell SMARTIS Radiometric thermal camera

SMARTIS Interfaces

  • 4x digital input/output for trigger
  • Power supply
  • Ethernet TCP/IP with a RJ-45 connector for communication with PLC, but also with the in-built webserver
  • 4x current output (0-24 mA/12 V current loop)
  • 7x digital output (with an open collector)


Play Video
Play Video
Play Video


Technical information & documents

Resolution336 x 256 pixels640 x 512 pixels
Image Frequency9Hz, 30Hz or 60Hz9Hz, 30Hz
Temperature ranges-25°C to +150°C (-13°F to +302°F), -40°C to +550°C (-40°F to +1 022°F), optional with external filter +400°C to +1 500°C (+752°F to +2 732°F) and 50°C to 1000°C (122°F to 1832°F)
Temperature sensitivity0.05°C (50mK, 0.09°F)
Accuracy±2% or ±2°C (±3.6°F)
Spectral Range7.5 – 13.5 μm
CalibrationYes, the system includes the calibration certificate
Detector TypeUncooled VOx microbolometer
Optics (FOV)17°, 25°, 35°, 45°32°, 45°, 69°
FocusContinuous Manual (fixed focusable, min focus distance depends on lens)
NetworkingEthernet 100Mb/sec, RJ-45, Metal cable gland protection
Analog output4-channel isolated Current loop (0-24mA) / Voltage (±12VDC, M12 circular thread)
Camera configurationBuilt-in WEBserver for easy and fast sensor configuration, Google Chrome or Firefox browser compatible, no external software required
VizualizationRealtime video streaming, Pallete settings, Overlay elements, Digital zooming, Numeric and statistical indicators, Input and Output overview panel
ROIUser definable measurement area (Point, Line, Polyline, Rect, Polygon, Circle) Multiple product selection for ROI presets (Manual or via Ethernet)
Dimensions and weight185 x 100 x 105 mm, 1.3 kg, Durable aluminum two – milled body


EN, 1.5 MB, v210513

    Write a review