SensoGuard Team of engineers has more than 10 years of experience in development of intrusion detection systems based on seismic technology (unattended ground sensor) for both civil and military use. Our sensors are installed worldwide in various applications.
High Value Assets and Private House Protection.
Most of the private houses contain a lot of plant and trees in the garden which causes a lot of false alarms from the conventional outdoor motion detectors.
In addition, outdoor motion detectors interfere with the appearance of the house. SensoGuard SG-1 seismic detector solves those problems. Our seismic detector is not sensitive to movement of vegetation and other environmental conditions such as: rain, fog, wind and temperature changes. SG-1 seismic detector is installed underground, doesn't interfere with the the appearance of the house and impossible to bypass or manipulate.
The unattended ground sensor does not require any maintenance and is designed under the most stringent requirements for continuous work for many years. Seismic detector SG-1 has dry contact output (N.O, N.C) and can be combined in any standard alarm system (like any other detector).
Perimeter Security Systems.
Perimeter intrusion detection system (PIDS) based on seismic technology.The system is suitable for protection of:
- Communication and cell tower sites
- Water reservoirs
- Solar power, Wind power facilities
- Illegal waste facilities
The system composed of unattended ground sensors installed 50cm underground.The seismic perimeter security system creates a virtual fence (invisible fence) with a width of 6 meters.The system detects and classifies footsteps and vehicle and can be configured with different sensitivity levels for each.Alerts can be seen in our command and control system (C&C).The C&C software shows the alarms of the system with map indication of the specific location of intrusion to the protected area.The system can be integrated with CCTV cameras for alarm verification and recording.
Remote Site Protection.
SafeWay seismic security system provides a discrete, invisible underground solution for remote infrastructure sites and routes protection.The system is impossible to manipulate or bypass and immune to environmental condition such as: rain, fog, wind, temperature changes.The location of the system (outside of the protected area) provides an early warning and longer response time.Our route protection system can detect and classify footsteps or vehicles and different sensitivity level can be set for each.SafeWay seismic security system has a coverage area of approximately 120sqm which makes it perfect for route protection.The system sends an SMS text message with an indication which type of alert was detected.The user can set operating hours for the system and up to 3 recipients for SMS messages.
Wireless seismic sensors for tactical operations
The system composed of wireless seismic sensors especially designed for rapid deployment at sensitive areas.The installation of the sensors is very easy and doesn't require field calibration.Each detector creates a protected area of at least 50sqm.The system detect and classify footsteps and vehicles and includes different sensitivity levels for each.The sensors sends the alarm messages through RF (optional frequencies: 433Mhz,868Mhz, 2.4Ghz).
The alarms can be displayed in various possibilities:
Rugged tablet, PC or our small handheld device with LED position indication of alarms.
Perimeter security system for military bases
Perimeter intrusion detection system (PIDS) based on seismic technology.The system composed of seismic sensors installed 50cm underground.
The seismic perimeter security system creates a virtual fence (invisible fence) with a width of 6 meters.The system detects and classifies footsteps and vehicle and can be configured with different sensitivity levels for each.Alerts can be seen in our command and control system (C&C).The C&C software shows the alarms of the system with map indication of the specific location of intrusion to the protected area.The system can be integrated with CCTV cameras for alarm verification and recording.
SG Guard Tower
SensoGuard offer full security solution for remote sites protection.Enjoy the advantages of our underground seismic detectors with the ability for alarm validation with remote camera.SG-Guard Tower is composed of our 3G video streaming system which installed on at least 4m height pole, connected to SG-1-Wireless seismic detectors at strategic locations.The SG-1-Wireless seismic detectors are installed underground, hidden to the intruder's eyes.When any of the detectors recognize footsteps or vehicle movement on the protected zone it sends a command to the remote camera wirelessly.The camera points to the relevant location and start to record a video clip.The user receive an alert message and can view live video from the field as well as the recorded video clip.