The SG-Wireless Net is designed for rapid deployment applications.
SensoGuard Unattand Ground Sensors (UGS) work on batteries on field for years, continuously monitoring the surrounding area of interest.
The network is built from group of up to 100 seismic detectors (UGS), and a network hub. multiple network hubs can be connected to the command and control (C&C) computer to cover larger areas.
SG Wireless Net Components
- Up to 100 SG-RF Wireless Seismic detector
- SG-Hub
- Command and Control compter (C&C)
- Handheld alarm receiver (for tactical applications)
Each seismic detector covers an area of 50 square meters (7m*7m), detects and classifies footsteps and vehicles (you can set different sensitivity levels for each).
The detector is very reliable and immune to environmental changes such as: fog, temperature changes, day & night conditions, rain, wind etc.
SG-RF: Features and Specifications
- Invisible wireless seismic detectors and hub unit
- Integrated with existing alert systems
- Ultra low power: Run by batteries as well as DC constant power supply
- Sensor coverage area: Up to 40m radius (depending on the area's terrain).
- RF Frequency: selectable VHF/UHF (173Mhz / 433Mhz / 868Mhz / 915Mhz)
- Working Temperature : -30 to 70 degrees (Celsius)
- Relative humidity = 95%
- Classifications: Intruder (footsteps) / Vehicle
- Maintenance free, easy operation (plug & play)
- Recommended installation depth below ground level: 20-50cm
- RoHS compliant
System Components
- Seismic Sensor
- Processing Units
- Hub Unit
Specifications
Seismic sensor
- Single seismic sensor
- Operating Radius: Up to 40m radius (depending on the area's terrain)
- IP level: 68
- Sensor dimensions: H=140mm (stab=75mm) ; W=40.7mm; L=36mm
Processing Unit
- Inputs : 1 Seismic Sensor, DC (Optional)
- Case Enclosure: IP67
- RF Frequency: selectable VHF/UHF (173Mhz / 433Mhz / 868Mhz / 915Mhz)
- Dimensions : W=82mm; L=120mm ; H=57mm
- Power consumption: ~1mA @ (3-24VCD)
Hub Unit
- Inputs : DC (Optional)
- Outputs : 2x Dry contacts, UART, RS232 (optional), RS485 (optional)
- Case Enclosure: IP67
- RF Frequency: selectable VHF/UHF (173Mhz / 433Mhz / 868Mhz / 915Mhz)
- Dimensions : W=82mm; L=120mm ; H=57mm
- Power consumption: 20mA @ (3-24VCD)
Indications:
- Intruder alert/Vehicle alert
- Sensor disconnected
- Battery status
- System ok
Specifications subject to change without notice.