• Right technology. Right price. Matching your needs.
  • You can rely on the solutions we offer.
  • You can count on the integrity of our advice.

XTM+ series

High resolution uncooled thermal OEM module

Ready-to-integrate thermal OEM module

The versatility of the XTM thermal camera module is expanded with the introduction of the XTM+ series.

Retaining its compact form and low power consumption, the XTM+ receives a performance boost to tackle applications with higher imaging requirements. Able to provide frame rates up to 60 Hz, the improved XTM+ will be beneficial for imaging applications at high speeds. The XTM+ comes with onboard image processing and interface controls. Furthermore, image quality is also enhanced with lower Noise Equivalent Temperature Difference of 50 mK and better pixel operability.

Incorporating the XTM+ into integrated systems is easy, with an extensive selection of interface options to choose from.

The XTM+ is the perfect solution for those looking for effective thermal imaging in a broad range of OEM applications.

Are you looking for more information?

Contact us for advice, detailed information and quotations.

Get in touch

Benefits & features

  • Low power
  • Low power consumption for easy integration, also in portable systems
  • High resolution
  • Easy connectivity
  • Small size, 17 μm pixel pitch
  • Higher speed imaging

Designed for use in

  • UAV / UGV
  • Gimbal
  • Night vision
  • Thermal sights
  • Border security
  • Fire fighting
  • Driver assistance
  • Police surveillance
  • Search & Rescue (SAR)

Features

Compatible with a variety of framegrabbers

Several compatible frame grabbers for CameraLink interface are available (Euresys Grablink Full, NI 1433 and Imperx Framelink Express VCE-CLEX01).

GigE Vision standard compatibility

The Gigabit Ethernet interface is compatible to the GigE Vision standard

Video output

Analog video output available

SWaP (Small size, weight and power )

Small volume, low weight and low power consumption for demanding applications

Trigger

External trigger for signal synchronization

Windowing mode

Imaging in a reduced window of interest for increased frame rates

16 bit image

Digitization: The module uses a 16 bit ADC

High sensitivity

Low noise equivalent temperature difference (NETD)

High resolution

640x480 pixel resolution

Day & Night Vision

The camera can operate under daylight or nighttime conditions

Camera specifications

Mechanical specifications

Mechanical specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Dimensions (width x height x length) - excluding lens (approximately) 45 x 45 x 63 mm 45 x 45 x 45 mm 45 x 45 x 47 mm
Weight (excluding lens) 125 gr 84 gr 99 gr
Optical interface M42 or M34 x 0.75    
Connector GigE RJ-45 NA NA
Connector CameraLink NA Standard SDR NA
Connector power Hirose HR10-7R-SA(73)    
Connector trigger SMA    
Connector analog NA NA BNC
Connector RS232 NA NA RJ-12

Environmental & power specifications

Environmental & power specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Ambient operating temperature range -40ºC to 60ºC    
Storage temperature range -40ºC to 85ºC    
Power consumption 4.5 W 2 W  
Power supply DC 12 V    

Electro-optical specifications

Electro-optical specifications XTM+ 640 GigE XTM+ 640 CL XTM+ 640 PAL/NTSC
Image format 640 (w) x 480 (h) pixels    
Pixel pitch 17 μm    
Detector type a-Si microbolometer    
Integration type Rolling shutter    
Active area and diagonal 10.88 mm x 8.16 mm (13.6 mm diagonal)    
Detector NETD (Noise Equivalent Temperature Difference) <50 mK (at 30 Hz, 300 K, F/1)    
Spectral range 8 μm to 14 μm    
Pixel operability > 99.5 %    
Maximum frame rate (full frame) 60 Hz or 9 Hz   25 Hz (PAL), 30 Hz or 9 Hz (NTSC)
Integration time range 1 μs - 80 μs    
Region of interest Yes    
Min region size 160 x 120 pixels    
Analog-to-Digital (ADC) 16 bits    
Command and control GigE Vision CameraLink RS232 (XSP)
Digital output format 16 bit GigE Vision 16 bit base CameraLink -
Trigger in or out via SMA (configurable) (not for 9Hz) in or out via SMA or CL-CC1 (configurable) (not for 9Hz) in or out via SMA (configurable) (not for 9Hz)

Documents

Application notes

Thermal camera cores for reconnaissance robots Customer Success Story - XTM thermal OEM core installed on reconnaissance robot
Dual-Band Monitoring Keeps Trains Running in Winter Keeping critical parts of the railroad infrastructure free of snow, sleet, hail and ice – and even detecting unauthorized persons walking the rails – is essential for a safe and uninterrupted transportation service. Dual-band monitoring of critical rail elements with a PTZ (pan, tilt and zoom) camera platform in the visible and thermal infrared ranges can remotely inspect installed switch heaters at a range of up to 2000 ft.

Press Releases

Xenics at SPIE DSS 2011: high performance infrared OEM modules for easy integration We offer high resolution infrared OEM modules in both SWIR (XSW-640) as LWIR (XTM-640) (2011)
Xenics sees strong growth ahead for OEM module business The OEM module business will grow strongly, especially in the security market. That is why we target the security market with our XenicsCores (2014)
Infrared cameras for security applications Xenics returns to DSEI with its line up of cameras suited for safety & security applications.

Technical documents

T3 XTM C This file contains all the technical documents for the XTM camera core.

Datasheets

Datasheet XTM+ series

Ask about this product

Featured Products